Read · WX Logbook
Observation Tools

How to Record Your Weather Sensor Location and Exposure

A sensor number is easier to interpret later when it travels with a description of where and how it was exposed. Record the sensor identity, approximate height, surface, nearby obstacles, orientation, and chang

A NOAA atmospheric observation tower in an open field
Photo: Shelby Frisch / NOAA Physical Sciences Laboratory · Source: NOAA Physical Sciences Laboratory · License: Public domain (U.S. government work)

A sensor number is easier to interpret later when it travels with a description of where and how it was exposed. Record the sensor identity, approximate height, surface, nearby obstacles, orientation, and changes to the site. This creates context; it does not certify the site, prove professional calibration, or make a home station equivalent to an official observing station.

A NOAA automated surface observing system instrument array
Photo: NOAA / National Weather Service · Source: National Weather Service · License: Public domain (U.S. government work)

Why a number without a site is incomplete

Imagine two temperature readings with the same timestamp: one sensor is above a shaded, ventilated surface and another is beside a sun-warmed wall. Without the site descriptions, a later reader cannot tell whether the difference reflects the air, the exposure, the instruments, or the records themselves. A wind reading beside a wall, in a courtyard, or in an open area raises a similar question.

The World Meteorological Organization’s Guide to Instruments and Methods of Observation treats measurements, observing systems, quality management, and testing as connected parts of observation practice. A home site card is much simpler, but it follows the same logic: a value needs enough context to be understood.

Use five metadata groups:

  1. Identity: what sensor or manual method produced the value?
  2. Position: where is it, and approximately how high is it?
  3. Surface and surroundings: what is beneath it, and what is nearby?
  4. Orientation and evidence: which direction is north, and what does a sketch or photograph show?
  5. Change history: what moved, grew, shaded, blocked, or was replaced later?

These fields describe a site. They are not a pass/fail score.

Keep the card beside the record rather than storing it as a one-time setup note that disappears. A later reader may know the sensor’s number but not remember that a hedge was cut, a balcony became shaded, or a manual gauge was moved after a storm. The card is most useful when its date and revision history are visible. If a field does not apply, write “not applicable”; if it was not checked, write “unknown.” Both are more honest than a blank that looks like a forgotten measurement.

Record what the sensor is and where it sits

Start with the simplest facts. Write the label you use for the sensor, the variable it is intended to observe, and the method: for example, “outdoor temperature sensor,” “manual rain gauge,” or “wind direction recorded from a vane.” If you do not know the model or the method’s limitations, write “unknown” rather than guessing.

Record the installation date and a repeatable place description. “Back garden” is less useful than “north side of the shed, viewed from the kitchen door.” Add an approximate height above the ground or surface and explain how you estimated it. “About 1.5 metres, measured with a tape” is different from “about chest height, estimated.”

Describe the surface beneath or around the sensor: soil, grass, paving, roof, balcony, wall, or another material. Note whether the surface is shaded, exposed to direct sun, likely to hold water, or affected by a nearby heat source. The purpose is not to create false precision. It is to make the conditions visible to the next reader.

Describe obstacles, airflow, and nearby surfaces

Draw a rough plan with a north arrow. Mark trees, buildings, fences, walls, large containers, vents, lights, and any object close enough to affect the exposure you are trying to describe. For each important object, write a direction and an approximate distance. If the distance is estimated, label it as an estimate.

For temperature, record a wall or paved surface as context rather than treating it as a built-in correction. For wind, record a wall, hedge, narrow passage, or roof edge that may shelter or channel the flow. For precipitation, note an overhanging branch or nearby obstacle that may change what reaches a collector. The WMO Siting Classification treats surroundings as an exposure question, not a universal home-station pass mark. The exact influence depends on the variable, geometry, and conditions; do not turn a possibility into a numerical correction.

The WMO Siting Classification exists because the relationship between a station and its surroundings affects how measurements are assessed. It shares practices used by meteorological services rather than offering a universal home-station pass mark. That is why this article asks you to document the surroundings without presenting the card as an official classification.

Add a sketch, photo context, and change log

The most useful sketch is not artistic. It has a north arrow, the sensor position, the nearest obstacles, and a note about the direction from which you took the photograph. A photo can show more than a sentence, but it should carry a date and context. “Photo taken from the patio looking north, 17 November 2026” is more useful than an unlabeled image.

Keep a change log even when nothing dramatic happens. Record when a tree was trimmed, a shade sail was added, a wall was painted, a sensor was moved, or a nearby construction project began. If you do not know when a change occurred, write an approximate date and mark it as uncertain.

For each field, separate three states:

  • Known: directly measured, labelled, dated, or clearly visible.
  • Estimated: a reasoned approximation such as distance judged from a sketch.
  • Unknown: not observed, not measured, or blocked from view.

This language protects the record from becoming more confident than the evidence.

When you revisit the site, do not overwrite the old description. Add a new dated entry and say what changed. “Sensor moved 0.5 m east on 22 November; new position beside the same grass surface” preserves a before-and-after comparison. If you cannot tell whether a change affected the measurement, leave the cause open. The record’s job is to make a later question answerable, not to settle every question immediately.

Worked example: complete the site card

The following is a hypothetical residential example, not a certification:

Site-card fieldExample entry
Sensor identityOutdoor temperature and humidity sensor; model not recorded
LocationNorth side of a detached shed in a small back garden
HeightAbout 1.6 m above grass; estimated with a tape measure on installation day
SurfaceGrass beneath sensor; shed wall 0.8 m to the south
Obstacles4 m hedge to the west; 7 m tree to the north; paved path 2 m east
OrientationSensor photo taken from the patio looking north; sketch includes a north arrow
Exposure noteMorning shade from the shed; afternoon sun may reach the sensor from the west
Change logNew shade sail added on 3 December; effect on afternoon exposure unknown
UnknownsNo formal siting classification; sensor model and shielding specification not recorded

The card is useful because it gives a future reader something to check. If an afternoon reading changes after the shade sail is installed, the change log supplies a possible context. It does not prove the cause, and it does not tell the reader that the original reading was professionally valid.

What this card can and cannot prove

A complete site card can show whether a later comparison is fair enough to attempt. It can reveal that two records came from different heights, surfaces, or exposures. It can also tell you when a comparison should be narrowed, labelled cautiously, or stopped.

It cannot prove calibration. It cannot prove that a sensor meets the requirements of a national observing network. The Met Office’s latest-observations guide distinguishes standard observing sites from non-standard sites and notes that standard sites must meet WMO exposure requirements. A home card should therefore describe its site honestly rather than borrow the language of an official station.

Recheck the card when the sensor moves, a nearby obstacle changes, or a reading shifts in a way that the recorded context does not explain. For the next diagnostic step, use How to Check Whether a Home Weather Station Is Measuring Well. That page owns plausibility checks; this one owns the site record.

Do not climb, enter an unsafe area, or adjust exposed electrical equipment just to complete a field. Record an unknown from a safe position. If the task requires electrical work, structural access, or a technical assessment beyond observation, stop and use qualified help.

The safest site card is therefore also the most honest one: it preserves what was visible, what was estimated, and what still needs a qualified answer.

Sources